Repairs and aftercare · SP10
Roller garage door motor replacement in Andover
We replace roller garage door motors of any make in Andover and across SP10 postcodes. Send us details of your control box and door size, and we'll confirm a compatible motor and the fitted price before the visit is booked.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Andover, SP10 and SP11
- Area
- Hampshire
Computer-generated image
What should I know about roller garage door motor replacement in Andover?
- Motors are matched to your barrel size and curtain weight, not just to the space inside the roller box.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in Andover?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Andover?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Andover and nearby
Andover is within the area we cover in Hampshire. Homes in SP10 and SP11 get the same survey, quote and fitting process as everywhere else we work. Andover is about 13 miles from Winchester.
Nearby, we also take enquiries from Winchester, Basingstoke and Eastleigh.
Rules that apply in Andover
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Andover: questions
What should I do while I wait for a visit in Andover?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Andover visit date is confirmed in writing.
Do you cover Andover?
Yes. Andover is part of the area we cover in Hampshire, including SP10 and SP11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
How much is a visit in Andover?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Andover as elsewhere we cover.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Andover
Repairs in Andover
Stuck door repair in Andover
Battery and safety in Andover
Replacement in Andover
Made-to-measure doors in Andover
Safety edge and photocells in Andover
Aluminium doors in Andover
Installation in AndoverRoller garage door motor replacement in Andover
Tell us what you need and we confirm the visit price before anyone comes out.