Sizes, finishes and features · NN8

Made-to-measure roller garage doors in Wellingborough

Got a garage opening in Wellingborough that doesn't seem to fit standard sizes? Made-to-measure roller doors are built to your width and height, with the box and fitting position chosen to suit. We cover homes in Northamptonshire.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Wellingborough, NN8
Area: Northamptonshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Wellingborough?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Wellingborough?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Wellingborough?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Wellingborough and nearby

Our coverage in Northamptonshire includes Wellingborough and the NN8 postcode district, so the same guide prices and written quotes apply here. For reference, Wellingborough sits roughly 9 miles from Northampton.

Looking from a neighbouring town? We also cover Rushden (4 miles) and Kettering (7 miles).

Rules that apply in Wellingborough

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Wellingborough: questions

How much do made-to-measure roller garage doors cost in Wellingborough?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Wellingborough as elsewhere we cover.

Do you charge more for Wellingborough than other towns in Northamptonshire?

No. Guide prices are the same for Wellingborough as for anywhere else we cover in Northamptonshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you cover Wellingborough?

Yes. Wellingborough is part of the area we cover in Northamptonshire, including NN8. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What do you check at a survey in NN8?

At a survey in NN8 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.