Sizes, finishes and features · PH1

Made-to-measure roller garage doors in Perth

Got a garage opening in Perth that doesn't seem to fit standard sizes? Made-to-measure roller doors are built to your width and height, with the box and fitting position chosen to suit. We cover homes in Perth and Kinross.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Perth, PH1 and PH2
Area: Perth and Kinross

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Perth?

Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.

How does it work in Perth?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Perth?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Perth and nearby

If your garage is in Perth (PH1 and PH2), you can get a guide price online now, and we confirm any survey or visit date in writing.

Looking from a neighbouring town? We also cover Kinross (13 miles) and Blairgowrie (14 miles).

Rules that apply in Perth

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need a building warrant from the local authority before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Perth: questions

Do you cover Perth?

Yes. Perth is part of the area we cover in Perth and Kinross, including PH1 and PH2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Perth without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Perth than other towns in Perth and Kinross?

No. Guide prices are the same for Perth as for anywhere else we cover in Perth and Kinross. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do I need permission for a new roller garage door in Perth?

Replacing a garage door is not usually development that needs planning permission in Scotland, and widening the opening needs a building warrant. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.