Sizes, finishes and features · TD9

Made-to-measure roller garage doors in Hawick

We can fit made-to-measure roller garage doors in Hawick and across TD9, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Hawick, TD9
Area: Scottish Borders

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Hawick?

Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Hawick?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Hawick?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hawick and nearby

If your garage is in Hawick (TD9), you can get a guide price online now, and we confirm any survey or visit date in writing. Hawick lies around 13 miles from Galashiels.

Looking from a neighbouring town? We also cover Galashiels (13 miles) and Kelso (18 miles).

Rules that apply in Hawick

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need a building warrant from the local authority before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Hawick: questions

What do you check at a survey in TD9?

At a survey in TD9 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I get a price for Hawick without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Hawick?

Yes. Hawick is part of the area we cover in the Scottish Borders, including TD9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much do made-to-measure roller garage doors cost in Hawick?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Hawick as elsewhere we cover.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.