Sizes, finishes and features · SA12

Made-to-measure roller garage doors in Port Talbot

We can fit made-to-measure roller garage doors in Port Talbot and across SA12, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Port Talbot, SA12 and SA13
Area: West Glamorgan

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Port Talbot?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.

How does it work in Port Talbot?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Port Talbot?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Port Talbot and nearby

If your garage is in Port Talbot (SA12 and SA13), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Port Talbot sits roughly 7 miles from Swansea.

Other places close to Port Talbot that we cover include Neath, Maesteg and Swansea.

Rules that apply in Port Talbot

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Port Talbot: questions

Do you cover Port Talbot?

Yes. Port Talbot is part of the area we cover in West Glamorgan, including SA12 and SA13. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Port Talbot without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Is the survey in Port Talbot really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do I need permission for a new roller garage door in Port Talbot?

Replacing a garage door is not usually development that needs planning permission in Wales, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.