Sizes, finishes and features · SA1

Made-to-measure roller garage doors in Swansea

For a made-to-measure roller door in Swansea, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in West Glamorgan turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Swansea, SA1, SA2 and SA5
Area: West Glamorgan

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Swansea?

Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.

How does it work in Swansea?

At a free survey in Swansea, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Swansea?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Swansea and nearby

If your garage is in Swansea (SA1, SA2 and SA5), you can get a guide price online now, and we confirm any survey or visit date in writing.

Nearby, we also take enquiries from Gorseinon, Neath and Port Talbot.

Rules that apply in Swansea

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Swansea: questions

Can you remove my old garage door in Swansea?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Swansea address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do you charge more for Swansea than other towns in West Glamorgan?

No. Guide prices are the same for Swansea as for anywhere else we cover in West Glamorgan. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How much do made-to-measure roller garage doors cost in Swansea?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Swansea as elsewhere we cover.

How long does it take to fit a roller garage door in Swansea?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.