Sizes, finishes and features · WF10

Made-to-measure roller garage doors in Castleford

We can fit made-to-measure roller garage doors in Castleford and across WF10, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Castleford, WF10 and WF6
Area: West Yorkshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Castleford?

Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Castleford?

At a free survey in Castleford, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Castleford?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Castleford and nearby

We survey and fit roller garage doors across Castleford, including WF10 and WF6, as part of our coverage in West Yorkshire. Castleford is about 9 miles from Leeds.

Nearby, we also take enquiries from Pontefract, Wakefield and Leeds.

Rules that apply in Castleford

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Castleford: questions

What do you check at a survey in WF10?

At a survey in WF10 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Is an electric roller door worth it for a garage in Castleford?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Castleford garage so you can compare.

How long does it take to fit a roller garage door in Castleford?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Is the survey in Castleford really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.