Roller door types · SP10

Manual roller garage doors in Andover

Swapping a worn-out door on a garage in Andover for a manual roller door is a straightforward job. We can fit anywhere in SP10, and the written quote confirms the door, finish and lock before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Andover, SP10 and SP11
Area: Hampshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Andover?

Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.

How does it work in Andover?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Andover?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Andover and nearby

Andover is within the area we cover in Hampshire. Homes in SP10 and SP11 get the same survey, quote and fitting process as everywhere else we work. Andover is about 13 miles from Winchester.

We also cover Winchester (13 miles), Basingstoke (18 miles) and Eastleigh (18 miles).

Rules that apply in Andover

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Manual roller garage doors in Andover: questions

Can you remove my old garage door in Andover?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Andover address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do you cover Andover?

Yes. Andover is part of the area we cover in Hampshire, including SP10 and SP11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is an electric roller door worth it for a garage in Andover?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Andover garage so you can compare.

What do you check at a survey in SP10?

At a survey in SP10 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.