Roller door types · KT10

Manual roller garage doors in Esher

Swapping a worn-out door on a garage in Esher for a manual roller door is a straightforward job. We can fit anywhere in KT10, and the written quote confirms the door, finish and lock before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Esher, KT10, KT12 and KT8
Area: Surrey

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Esher?

Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.

How does it work in Esher?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Esher?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Esher and nearby

Esher is within the area we cover in Surrey. Homes in KT10, KT12 and KT8 get the same survey, quote and fitting process as everywhere else we work. For reference, Esher sits roughly 13 miles from Guildford.

Other places close to Esher that we cover include Walton-on-Thames, Hampton and Sunbury-on-Thames.

Rules that apply in Esher

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Manual roller garage doors in Esher: questions

Can I message you a photo of my garage in Esher?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Esher. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Is an electric roller door worth it for a garage in Esher?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Esher garage so you can compare.

Do you charge more for Esher than other towns in Surrey?

No. Guide prices are the same for Esher as for anywhere else we cover in Surrey. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How long does it take to fit a roller garage door in Esher?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.