Fitting, replacement and upgrades · BN41
Manual to electric roller door conversion in Portslade
Manual to electric conversions in Portslade start with an honest check of your existing door. If it's sound, we quote for the conversion; if it isn't, we say so and price a new electric door instead. We cover BN41 postcodes with a free survey and written quote.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Portslade, BN41, BN42 and BN3
- Area
- East Sussex
Computer-generated image
What should I know about manual to electric roller door conversion in Portslade?
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
How does it work in Portslade?
Once you accept, your fitting date is confirmed in writing and depends on installer availability. On the day the motor, controls and safety devices are fitted, tested and handed over with the paperwork.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Portslade?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Portslade and nearby
We survey and fit roller garage doors across Portslade, including BN41, BN42 and BN3, as part of our coverage in East Sussex. Portslade is about 4 miles from Brighton.
We also cover Hove (2 miles), Brighton (4 miles) and Worthing (7 miles).
Rules that apply in Portslade
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Portslade: questions
Do you cover Portslade?
Yes. Portslade is part of the area we cover in East Sussex, including BN41, BN42 and BN3. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Portslade without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What do you check at a survey in BN41?
At a survey in BN41 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Can I message you a photo of my garage in Portslade?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Portslade. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Other roller door services in Portslade
Electric doors in Portslade
Remotes and keypads in Portslade
Battery and safety in Portslade
Manual doors in Portslade
Safety edge and photocells in Portslade
Stuck door repair in Portslade
Low-headroom doors in Portslade
Made-to-measure doors in PortsladeManual to electric roller door conversion in Portslade
See a guide price in four steps, then book a free survey.