Fitting, replacement and upgrades · M46
Manual to electric roller door conversion in Atherton
If your roller door in Atherton is in good condition but heavy to lift, a conversion may suit it. We survey homes in the M46 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Atherton, M46, M29 and M38
Computer-generated image
What should I know about manual to electric roller door conversion in Atherton?
- A manual override lets you open the converted door in a power cut, and a battery backup unit can be added.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
How does it work in Atherton?
We check the curtain, barrel, box, guides and power, and confirm whether the door can take a motor. You receive a written quote for the conversion, or for a new door if conversion isn't suitable.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Atherton?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Atherton and nearby
Atherton is within the area we cover in Greater Manchester. Homes in M46, M29 and M38 get the same survey, quote and fitting process as everywhere else we work. For reference, Atherton sits roughly 11 miles from Manchester.
We also cover Tyldesley (1 mile), Westhoughton (2 miles) and Leigh (2 miles).
Rules that apply in Atherton
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Atherton: questions
Can I message you a photo of my garage in Atherton?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Atherton. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Do you charge more for Atherton than other towns in Greater Manchester?
No. Guide prices are the same for Atherton as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Is an electric roller door worth it for a garage in Atherton?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Atherton garage so you can compare.
Do I need permission for a new roller garage door in Atherton?
Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
Will I still be able to open the door by hand?
Not in the way you do now, because the motor holds the curtain in place. Most electric roller doors have a manual override, usually an internal crank or winding handle, for use in a power cut. A battery backup unit can also be added so the door runs for a limited number of cycles when the power is off.
Other roller door services in Atherton
Electric doors in Atherton
Remotes and keypads in Atherton
Battery and safety in Atherton
Manual doors in Atherton
Repairs in Atherton
Made-to-measure doors in Atherton
Security-rated doors in Atherton
Colours and woodgrain in AthertonManual to electric roller door conversion in Atherton
See a guide price in four steps, then book a free survey.