Fitting, replacement and upgrades · M32
Manual to electric roller door conversion in Stretford
Converting a roller door to electric in Stretford means more than adding a motor. Every door we convert for homes in Greater Manchester gets safety devices, force testing to BS EN 12453 and a Declaration of Conformity at handover.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Stretford, M32, M17 and M41
Computer-generated image
What should I know about manual to electric roller door conversion in Stretford?
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.
How does it work in Stretford?
Get a guide price online for converting your manual roller door. Then book a free survey at your home in Stretford.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Stretford?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Stretford and nearby
We survey and fit roller garage doors across Stretford, including M32, M17 and M41, as part of our coverage in Greater Manchester. Stretford is about 4 miles from Manchester.
Other places close to Stretford that we cover include Urmston, Sale and Eccles.
Rules that apply in Stretford
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Stretford: questions
What do you check at a survey in M32?
At a survey in M32 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Do you charge more for Stretford than other towns in Greater Manchester?
No. Guide prices are the same for Stretford as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do I need permission for a new roller garage door in Stretford?
Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
Can I get a price for Stretford without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What safety devices are added to a converted door?
A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.
Will I still be able to open the door by hand?
Not in the way you do now, because the motor holds the curtain in place. Most electric roller doors have a manual override, usually an internal crank or winding handle, for use in a power cut. A battery backup unit can also be added so the door runs for a limited number of cycles when the power is off.
Other roller door services in Stretford
Manual to electric roller door conversion in Stretford
See a guide price in four steps, then book a free survey.
