Fitting, replacement and upgrades · SG5
Manual to electric roller door conversion in Hitchin
If your roller door in Hitchin is in good condition but heavy to lift, a conversion may suit it. We survey homes in the SG5 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Hitchin, SG5 and SG4
- Area
- Hertfordshire
Computer-generated image
What should I know about manual to electric roller door conversion in Hitchin?
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
How does it work in Hitchin?
Once you accept, your fitting date is confirmed in writing and depends on installer availability. On the day the motor, controls and safety devices are fitted, tested and handed over with the paperwork.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Hitchin?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Hitchin and nearby
Our coverage in Hertfordshire includes Hitchin and the SG5 and SG4 postcode districts, so the same guide prices and written quotes apply here. Hitchin is about 14 miles from Hertford.
We also cover Letchworth Garden City (3 miles), Stevenage (5 miles) and Luton (7 miles).
Rules that apply in Hitchin
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Hitchin: questions
Do you cover Hitchin?
Yes. Hitchin is part of the area we cover in Hertfordshire, including SG5 and SG4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Hitchin without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What do you check at a survey in SG5?
At a survey in SG5 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Is the survey in Hitchin really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
What safety devices are added to a converted door?
A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Other roller door services in Hitchin
Electric doors in Hitchin
Remotes and keypads in Hitchin
Battery and safety in Hitchin
Manual doors in Hitchin
Up-and-over conversion in Hitchin
Smart doors in Hitchin
Installation in Hitchin
Replacement in HitchinManual to electric roller door conversion in Hitchin
See a guide price in four steps, then book a free survey.