Fitting, replacement and upgrades · SA1
Manual to electric roller door conversion in Swansea
If your roller door in Swansea is in good condition but heavy to lift, a conversion may suit it. We survey homes in the SA1 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Swansea, SA1, SA2 and SA5
- Area
- West Glamorgan
Computer-generated image
What should I know about manual to electric roller door conversion in Swansea?
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- A manual override lets you open the converted door in a power cut, and a battery backup unit can be added.
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
How does it work in Swansea?
Once you accept, your fitting date is confirmed in writing and depends on installer availability. On the day the motor, controls and safety devices are fitted, tested and handed over with the paperwork.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Swansea?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Swansea and nearby
We survey and fit roller garage doors across Swansea, including SA1, SA2 and SA5, as part of our coverage in West Glamorgan.
Nearby, we also take enquiries from Gorseinon, Neath and Port Talbot.
Rules that apply in Swansea
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Swansea: questions
Do you charge more for Swansea than other towns in West Glamorgan?
No. Guide prices are the same for Swansea as for anywhere else we cover in West Glamorgan. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Is an electric roller door worth it for a garage in Swansea?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Swansea garage so you can compare.
How much does manual to electric roller door conversion cost in Swansea?
Our guide price for manual to electric roller door conversion is from £495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Swansea as elsewhere we cover.
Can I get a price for Swansea without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
What safety devices are added to a converted door?
A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.
Other roller door services in Swansea
Manual to electric roller door conversion in Swansea
See a guide price in four steps, then book a free survey.
