Fitting, replacement and upgrades · TN13
Roller garage door installation in Sevenoaks
Fitting a roller door in Sevenoaks starts with the same checks as anywhere in Kent: width, height, headroom for the box, side room for the guides, the lintel and the floor level. You then get a written quote, and the fitting date is confirmed in writing.
- Guide price
- from £1,195 inc VAT
- First step
- Free survey
- Covers
- Sevenoaks, TN13 and TN14
- Area
- Kent
Computer-generated image
What should I know about roller garage door installation in Sevenoaks?
- Every powered door we fit is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- We check the lintel, reveals and floor level at the survey, and price any building work before you agree to it.
- Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, shown as its own line in the quote.
- Single-skin, insulated, security-rated and steel doors are available, manual or electric, for openings up to 5.5 m wide.
How does it work in Sevenoaks?
Once you accept the quote, we confirm your fitting date in writing; it depends on installer availability. On the day the old door is removed, the new door is fitted and commissioned, and the paperwork is handed over.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much does roller garage door installation cost in Sevenoaks?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Electric single-skin roller door, single up to 2.4 m | £1,195–£1,745 | £995.83–£1,454.17 + VAT |
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Sevenoaks and nearby
We take enquiries from across Sevenoaks, from TN13 outwards, and confirm every price and date in writing before anything is ordered. For reference, Sevenoaks sits roughly 14 miles from Maidstone.
We also cover Tonbridge (6 miles), Orpington (8 miles) and Swanley (9 miles).
Rules that apply in Sevenoaks
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door installation in Sevenoaks: questions
Can you remove my old garage door in Sevenoaks?
Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Sevenoaks address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.
Do you charge more for Sevenoaks than other towns in Kent?
No. Guide prices are the same for Sevenoaks as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Is the survey in Sevenoaks really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
Can I message you a photo of my garage in Sevenoaks?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Sevenoaks. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
How long does it take to fit a roller garage door?
Fitting a domestic roller door on a sound opening normally takes a day or less, including removing the old door, commissioning and handover. Extra work such as a new lintel, building out the reveals or a new fused spur can add time. Your fitting date depends on installer availability and is confirmed in writing before the day.
Can you fit a roller door to a garage that has never had one?
Yes. Whether the opening has no door at all, a temporary cover, or a door you want taken away, the survey works the same way. We check the lintel, reveals, floor level and headroom, and anything the opening needs first, such as a new lintel, is priced on survey and shown in your quote.
Other roller door services in Sevenoaks
Replacement in Sevenoaks
Electric doors in Sevenoaks
Insulated doors in Sevenoaks
Up-and-over conversion in Sevenoaks
Damaged laths in Sevenoaks
Battery and safety in Sevenoaks
Aluminium doors in Sevenoaks
Vision and vent laths in SevenoaksRoller garage door installation in Sevenoaks
See a guide price in four steps, then book a free survey.