Fitting, replacement and upgrades · PA4
Roller garage door installation in Renfrew
If your garage in Renfrew has no door yet, an old door you want gone, or an opening that needs work first, we can survey it and price it. Homes in the PA4 area get a free survey and a written quote before anything is agreed.
- Guide price
- from £1,195 inc VAT
- First step
- Free survey
- Covers
- Renfrew, PA4, PA1 and PA3
Computer-generated image
What should I know about roller garage door installation in Renfrew?
- Every powered door we fit is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- Single-skin, insulated, security-rated and steel doors are available, manual or electric, for openings up to 5.5 m wide.
- You can choose a fitting position behind the opening, between the reveals or face-fixed, depending on the space inside the garage.
- We check the lintel, reveals and floor level at the survey, and price any building work before you agree to it.
How does it work in Renfrew?
At the survey we measure the opening, check headroom, side room, the lintel and power, and talk through door options. You receive a written quote listing the door, any extras and anything priced on survey.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much does roller garage door installation cost in Renfrew?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Electric single-skin roller door, single up to 2.4 m | £1,195–£1,745 | £995.83–£1,454.17 + VAT |
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Renfrew and nearby
We survey and fit roller garage doors across Renfrew, including PA4, PA1 and PA3, as part of our coverage in Renfrewshire and Inverclyde. Renfrew lies around 3 miles from Paisley.
Nearby, we also take enquiries from Clydebank, Paisley and Govan.
Rules that apply in Renfrew
Planning
Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.
Electrics
An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.
Roller garage door installation in Renfrew: questions
Do you cover Renfrew?
Yes. Renfrew is part of the area we cover in Renfrewshire and Inverclyde, including PA4, PA1 and PA3. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can you remove my old garage door in Renfrew?
Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Renfrew address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.
Can I get a price for Renfrew without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do I need permission for a new roller garage door in Renfrew?
Replacing a garage door is not usually development that needs planning permission in Scotland, and widening the opening needs a building warrant. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
Can a roller door fit if my garage has a low ceiling?
Yes. A roller door needs no ceiling space because the curtain coils into a box above the opening. What matters is headroom between the top of the opening and the ceiling or roof. If there isn't enough for the box behind the lintel, it can go under the lintel, which reduces the clear height, or be face-fixed on the wall.
How long does it take to fit a roller garage door?
Fitting a domestic roller door on a sound opening normally takes a day or less, including removing the old door, commissioning and handover. Extra work such as a new lintel, building out the reveals or a new fused spur can add time. Your fitting date depends on installer availability and is confirmed in writing before the day.
Other roller door services in Renfrew
Replacement in Renfrew
Electric doors in Renfrew
Insulated doors in Renfrew
Up-and-over conversion in Renfrew
Aluminium doors in Renfrew
Low-headroom doors in Renfrew
Damaged laths in Renfrew
Colours and woodgrain in RenfrewRoller garage door installation in Renfrew
See a guide price in four steps, then book a free survey.