Call 0800 088 6248

Fitting, replacement and upgrades · BS20

Roller garage door installation in Portishead

A roller door suits garages in Portishead where ceiling space or drive length is tight, because the curtain coils up into a box. We can fit doors for homes and private garage courts in Somerset, with dates set by installer availability and confirmed in writing.

Guide price
from £1,195 inc VAT
First step
Free survey
Covers
Portishead, BS20
Installer drilling to fix a roller door guide rail to a brick revealComputer-generated image

What should I know about roller garage door installation in Portishead?

  • You can choose a fitting position behind the opening, between the reveals or face-fixed, depending on the space inside the garage.
  • Door prices include supply, fitting, and removal and disposal of an old roller or up-and-over door.
  • We check the lintel, reveals and floor level at the survey, and price any building work before you agree to it.
  • Single-skin, insulated, security-rated and steel doors are available, manual or electric, for openings up to 5.5 m wide.

How does it work in Portishead?

Start with a guide price online for the door type and width you have in mind. Then book a free survey at your home in Portishead.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much does roller garage door installation cost in Portishead?

ItemGuide price (inc VAT)Ex VAT
Electric single-skin roller door, single up to 2.4 m£1,195–£1,745£995.83–£1,454.17 + VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Portishead and nearby

We survey and fit roller garage doors across Portishead, including BS20, as part of our coverage in Somerset. For reference, Portishead sits roughly 35 miles from Taunton.

Nearby, we also take enquiries from Nailsea, Clevedon and Kingswood.

Rules that apply in Portishead

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage door installation in Portishead: questions

Do you charge more for Portishead than other towns in Somerset?

No. Guide prices are the same for Portishead as for anywhere else we cover in Somerset. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How long does it take to fit a roller garage door in Portishead?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can you remove my old garage door in Portishead?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Portishead address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What do you check at a survey in BS20?

At a survey in BS20 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can you fit a roller door to a garage that has never had one?

Yes. Whether the opening has no door at all, a temporary cover, or a door you want taken away, the survey works the same way. We check the lintel, reveals, floor level and headroom, and anything the opening needs first, such as a new lintel, is priced on survey and shown in your quote.

Other roller door services in Portishead

Roller garage door installation in Portishead

See a guide price in four steps, then book a free survey.

CallGuide price