Repairs and aftercare · CM9
Roller garage door motor replacement in Maldon
When a roller door motor fails in Maldon, the rest of the door may still be worth keeping. We'll check that for homes in Essex, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Maldon, CM9
- Area
- Essex
Computer-generated image
What should I know about roller garage door motor replacement in Maldon?
- Motors are matched to your barrel size and curtain weight, not just to the space inside the roller box.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in Maldon?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Maldon?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Maldon and nearby
We survey and fit roller garage doors across Maldon, including CM9, as part of our coverage in Essex. For reference, Maldon sits roughly 9 miles from Chelmsford.
Nearby, we also take enquiries from Witham, Chelmsford and Rayleigh.
Rules that apply in Maldon
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Maldon: questions
Can I get a price for Maldon without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you repair roller doors you did not fit in Maldon?
Yes. We repair roller garage doors of any make in Maldon and across CM9, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Do you cover Maldon?
Yes. Maldon is part of the area we cover in Essex, including CM9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you charge more for Maldon than other towns in Essex?
No. Guide prices are the same for Maldon as for anywhere else we cover in Essex. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Other roller door services in Maldon
Repairs in Maldon
Stuck door repair in Maldon
Battery and safety in Maldon
Replacement in Maldon
Electric doors in Maldon
Manual to electric in Maldon
Remotes and keypads in Maldon
Made-to-measure doors in MaldonRoller garage door motor replacement in Maldon
Tell us what you need and we confirm the visit price before anyone comes out.