Repairs and aftercare · CM1
Roller garage door motor replacement in Chelmsford
We replace roller garage door motors of any make in Chelmsford and across CM1 postcodes. Send us details of your control box and door size, and we'll confirm a compatible motor and the fitted price before the visit is booked.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Chelmsford, CM1 and CM2
- Area
- Essex
Computer-generated image
What should I know about roller garage door motor replacement in Chelmsford?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Chelmsford?
Tell us what the roller door at your home in Chelmsford is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Chelmsford?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Chelmsford and nearby
Chelmsford is within the area we cover in Essex. Homes in CM1 and CM2 get the same survey, quote and fitting process as everywhere else we work.
Other places close to Chelmsford that we cover include Billericay, Witham and Maldon.
Rules that apply in Chelmsford
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Chelmsford: questions
Do you charge more for Chelmsford than other towns in Essex?
No. Guide prices are the same for Chelmsford as for anywhere else we cover in Essex. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you repair roller doors you did not fit in Chelmsford?
Yes. We repair roller garage doors of any make in Chelmsford and across CM1 and CM2, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
How much is a visit in Chelmsford?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Chelmsford as elsewhere we cover.
Can I get a price for Chelmsford without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Chelmsford
Roller garage door motor replacement in Chelmsford
Tell us what you need and we confirm the visit price before anyone comes out.
