Call 0800 088 6248

Repairs and aftercare · WN1

Roller garage door motor replacement in Wigan

If the electric roller door on your garage in Wigan has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Greater Manchester, set the limits and test the safety devices, with the price agreed before we come out.

Guide price
from £395 inc VAT
First step
Visit price agreed first
Covers
Wigan, WN1, WN3 and WN5
Engineer on a step ladder working on the tubular motor inside an open roller boxComputer-generated image

What should I know about roller garage door motor replacement in Wigan?

  • A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
  • Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
  • If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
  • The engineer shows you how the manual override works on your new motor before handing the door back.

How does it work in Wigan?

Tell us what the roller door at your home in Wigan is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.

  1. STEP 01

    Tell us about the door

    Describe the door and what you need, with a photo or video if you can.

  2. STEP 02

    Agree the visit price

    We confirm the visit price before anyone comes out.

  3. STEP 03

    Visit

    The engineer finds the cause and makes the door safe where possible.

  4. STEP 04

    Parts quoted first

    Any parts are quoted before they are fitted, so you decide.

How much does roller garage door motor replacement cost in Wigan?

ItemGuide price (inc VAT)Ex VAT
Tubular motor replacement, fitted and commissioned£395–£695£329.17–£579.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Wigan and nearby

We take enquiries from across Wigan, from WN1 outwards, and confirm every price and date in writing before anything is ordered. Wigan is about 17 miles from Manchester.

Other places close to Wigan that we cover include Hindley, Ashton-in-Makerfield and Westhoughton.

Rules that apply in Wigan

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage door motor replacement in Wigan: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you charge more for Wigan than other towns in Greater Manchester?

No. Guide prices are the same for Wigan as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Wigan?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Wigan. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How much is a visit in Wigan?

Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Wigan as elsewhere we cover.

Will my old remotes work with the new motor?

Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.

Should I replace the motor or the whole door?

Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.

Other roller door services in Wigan

Roller garage door motor replacement in Wigan

Tell us what you need and we confirm the visit price before anyone comes out.

CallGuide price