Repairs and aftercare · PO12
Roller garage door motor replacement in Gosport
If the electric roller door on your garage in Gosport has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Hampshire, set the limits and test the safety devices, with the price agreed before we come out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Gosport, PO12, PO1 and PO5
- Area
- Hampshire
Computer-generated image
What should I know about roller garage door motor replacement in Gosport?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Gosport?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Gosport?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Gosport and nearby
If your garage is in Gosport (PO12, PO1 and PO5), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Gosport sits roughly 20 miles from Winchester.
Nearby, we also take enquiries from Portsmouth, Fareham and Ryde.
Rules that apply in Gosport
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Gosport: questions
Can I get a price for Gosport without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you charge more for Gosport than other towns in Hampshire?
No. Guide prices are the same for Gosport as for anywhere else we cover in Hampshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you repair roller doors you did not fit in Gosport?
Yes. We repair roller garage doors of any make in Gosport and across PO12, PO1 and PO5, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
What should I do while I wait for a visit in Gosport?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Gosport visit date is confirmed in writing.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Gosport
Repairs in Gosport
Stuck door repair in Gosport
Battery and safety in Gosport
Replacement in Gosport
Aluminium doors in Gosport
Up-and-over conversion in Gosport
Damaged laths in Gosport
Insulated doors in GosportRoller garage door motor replacement in Gosport
Tell us what you need and we confirm the visit price before anyone comes out.