Repairs and aftercare · CT1
Roller garage door motor replacement in Canterbury
Motor replacement in Canterbury includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the CT1 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Canterbury, CT1 and CT2
- Area
- Kent
Computer-generated image
What should I know about roller garage door motor replacement in Canterbury?
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
How does it work in Canterbury?
Tell us what the roller door at your home in Canterbury is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Canterbury?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Canterbury and nearby
We survey and fit roller garage doors across Canterbury, including CT1 and CT2, as part of our coverage in Kent. For reference, Canterbury sits roughly 24 miles from Maidstone.
Other places close to Canterbury that we cover include Whitstable, Herne Bay and Faversham.
Rules that apply in Canterbury
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Canterbury: questions
Can I get a price for Canterbury without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you cover Canterbury?
Yes. Canterbury is part of the area we cover in Kent, including CT1 and CT2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Can I message you a photo of my garage in Canterbury?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Canterbury. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Other roller door services in Canterbury
Repairs in Canterbury
Stuck door repair in Canterbury
Battery and safety in Canterbury
Replacement in Canterbury
Low-headroom doors in Canterbury
Double and wide doors in Canterbury
Smart doors in Canterbury
Manual to electric in CanterburyRoller garage door motor replacement in Canterbury
Tell us what you need and we confirm the visit price before anyone comes out.