Repairs and aftercare · CT5
Roller garage door motor replacement in Whitstable
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Whitstable and elsewhere in Kent, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Whitstable, CT5
- Area
- Kent
Computer-generated image
What should I know about roller garage door motor replacement in Whitstable?
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Whitstable?
Tell us what the roller door at your home in Whitstable is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Whitstable?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Whitstable and nearby
We take enquiries from across Whitstable, from CT5 outwards, and confirm every price and date in writing before anything is ordered. Whitstable is about 23 miles from Maidstone.
We also cover Herne Bay (4 miles), Canterbury (6 miles) and Faversham (7 miles).
Rules that apply in Whitstable
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Whitstable: questions
What should I do while I wait for a visit in Whitstable?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Whitstable visit date is confirmed in writing.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you cover Whitstable?
Yes. Whitstable is part of the area we cover in Kent, including CT5. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you charge more for Whitstable than other towns in Kent?
No. Guide prices are the same for Whitstable as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Other roller door services in Whitstable
Repairs in Whitstable
Stuck door repair in Whitstable
Battery and safety in Whitstable
Replacement in Whitstable
Steel doors in Whitstable
Installation in Whitstable
Damaged laths in Whitstable
Vision and vent laths in WhitstableRoller garage door motor replacement in Whitstable
Tell us what you need and we confirm the visit price before anyone comes out.