Repairs and aftercare · TN13
Roller garage door motor replacement in Sevenoaks
We replace roller garage door motors of any make in Sevenoaks and across TN13 postcodes. Send us details of your control box and door size, and we'll confirm a compatible motor and the fitted price before the visit is booked.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Sevenoaks, TN13 and TN14
- Area
- Kent
Computer-generated image
What should I know about roller garage door motor replacement in Sevenoaks?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
How does it work in Sevenoaks?
Tell us what the roller door at your home in Sevenoaks is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Sevenoaks?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Sevenoaks and nearby
If your garage is in Sevenoaks (TN13 and TN14), you can get a guide price online now, and we confirm any survey or visit date in writing. Sevenoaks lies around 14 miles from Maidstone.
Nearby, we also take enquiries from Tonbridge, Orpington and Swanley.
Rules that apply in Sevenoaks
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Sevenoaks: questions
Do you charge more for Sevenoaks than other towns in Kent?
No. Guide prices are the same for Sevenoaks as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can I get a price for Sevenoaks without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What should I do while I wait for a visit in Sevenoaks?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Sevenoaks visit date is confirmed in writing.
Do you repair roller doors you did not fit in Sevenoaks?
Yes. We repair roller garage doors of any make in Sevenoaks and across TN13 and TN14, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Other roller door services in Sevenoaks
Repairs in Sevenoaks
Stuck door repair in Sevenoaks
Battery and safety in Sevenoaks
Replacement in Sevenoaks
Remotes and keypads in Sevenoaks
Installation in Sevenoaks
Electric doors in Sevenoaks
Insulated doors in SevenoaksRoller garage door motor replacement in Sevenoaks
Tell us what you need and we confirm the visit price before anyone comes out.