Repairs and aftercare · TF3
Roller garage door motor replacement in Telford
Motor replacement in Telford includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the TF3 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Telford, TF3, TF4 and TF2
- Area
- Shropshire
Computer-generated image
What should I know about roller garage door motor replacement in Telford?
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
How does it work in Telford?
Tell us what the roller door at your home in Telford is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Telford?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Telford and nearby
Our coverage in Shropshire includes Telford and the TF3, TF4 and TF2 postcode districts, so the same guide prices and written quotes apply here. Telford lies around 13 miles from Shrewsbury.
Nearby, we also take enquiries from Wellington, Bridgnorth and Shrewsbury.
Rules that apply in Telford
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Telford: questions
Do you charge more for Telford than other towns in Shropshire?
No. Guide prices are the same for Telford as for anywhere else we cover in Shropshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you cover Telford?
Yes. Telford is part of the area we cover in Shropshire, including TF3, TF4 and TF2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Telford without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Telford
Repairs in Telford
Stuck door repair in Telford
Battery and safety in Telford
Replacement in Telford
Manual doors in Telford
Damaged laths in Telford
Low-headroom doors in Telford
Up-and-over conversion in TelfordRoller garage door motor replacement in Telford
Tell us what you need and we confirm the visit price before anyone comes out.