Repairs and aftercare · WS7
Roller garage door motor replacement in Burntwood
Motor replacement in Burntwood includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the WS7 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Burntwood, WS7 and WS8
- Area
- Staffordshire
Computer-generated image
What should I know about roller garage door motor replacement in Burntwood?
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Burntwood?
We confirm the motor price, or a diagnostic visit if the cause isn't clear. The visit is booked once an engineer and the right motor are available, and the date is confirmed in writing.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Burntwood?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Burntwood and nearby
Burntwood is within the area we cover in Staffordshire. Homes in WS7 and WS8 get the same survey, quote and fitting process as everywhere else we work. Burntwood lies around 12 miles from Stafford.
We also cover Lichfield (4 miles), Cannock (4 miles) and Aldridge (5 miles).
Rules that apply in Burntwood
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Burntwood: questions
Can I message you a photo of my garage in Burntwood?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Burntwood. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Can I get a price for Burntwood without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What should I do while I wait for a visit in Burntwood?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Burntwood visit date is confirmed in writing.
Do you cover Burntwood?
Yes. Burntwood is part of the area we cover in Staffordshire, including WS7 and WS8. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Burntwood
Repairs in Burntwood
Stuck door repair in Burntwood
Battery and safety in Burntwood
Replacement in Burntwood
Up-and-over conversion in Burntwood
Smart doors in Burntwood
Manual doors in Burntwood
Security-rated doors in BurntwoodRoller garage door motor replacement in Burntwood
Tell us what you need and we confirm the visit price before anyone comes out.