Repairs and aftercare · WS11
Roller garage door motor replacement in Cannock
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Cannock and elsewhere in Staffordshire, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Cannock, WS11, WS12 and WS6
- Area
- Staffordshire
Computer-generated image
What should I know about roller garage door motor replacement in Cannock?
- The engineer shows you how the manual override works on your new motor before handing the door back.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
How does it work in Cannock?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Cannock?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Cannock and nearby
We survey and fit roller garage doors across Cannock, including WS11, WS12 and WS6, as part of our coverage in Staffordshire. Cannock lies around 9 miles from Stafford.
We also cover Burntwood (4 miles), Bloxwich (5 miles) and Rugeley (6 miles).
Rules that apply in Cannock
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Cannock: questions
Do you repair roller doors you did not fit in Cannock?
Yes. We repair roller garage doors of any make in Cannock and across WS11, WS12 and WS6, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Do you charge more for Cannock than other towns in Staffordshire?
No. Guide prices are the same for Cannock as for anywhere else we cover in Staffordshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you cover Cannock?
Yes. Cannock is part of the area we cover in Staffordshire, including WS11, WS12 and WS6. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Cannock
Repairs in Cannock
Stuck door repair in Cannock
Battery and safety in Cannock
Replacement in Cannock
Steel doors in Cannock
Colours and woodgrain in Cannock
Remotes and keypads in Cannock
Manual to electric in CannockRoller garage door motor replacement in Cannock
Tell us what you need and we confirm the visit price before anyone comes out.