Repairs and aftercare · TW20
Roller garage door motor replacement in Egham
If the electric roller door on your garage in Egham has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Surrey, set the limits and test the safety devices, with the price agreed before we come out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Egham, TW20, TW18 and TW19
- Area
- Surrey
Computer-generated image
What should I know about roller garage door motor replacement in Egham?
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Egham?
Tell us what the roller door at your home in Egham is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Egham?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Egham and nearby
Our coverage in Surrey includes Egham and the TW20, TW18 and TW19 postcode districts, so the same guide prices and written quotes apply here. Egham lies around 14 miles from Guildford.
Nearby, we also take enquiries from Staines-upon-Thames, Ashford (Surrey) and Windsor.
Rules that apply in Egham
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Egham: questions
Do you repair roller doors you did not fit in Egham?
Yes. We repair roller garage doors of any make in Egham and across TW20, TW18 and TW19, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Can I message you a photo of my garage in Egham?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Egham. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
How much is a visit in Egham?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Egham as elsewhere we cover.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Other roller door services in Egham
Repairs in Egham
Stuck door repair in Egham
Battery and safety in Egham
Replacement in Egham
Installation in Egham
Remotes and keypads in Egham
Safety edge and photocells in Egham
Security-rated doors in EghamRoller garage door motor replacement in Egham
Tell us what you need and we confirm the visit price before anyone comes out.