Repairs and aftercare · NE1
Roller garage door motor replacement in Newcastle upon Tyne
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Newcastle upon Tyne and elsewhere in Tyne and Wear, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Newcastle upon Tyne, NE1, NE2 and NE4
- Area
- Tyne and Wear
Computer-generated image
What should I know about roller garage door motor replacement in Newcastle upon Tyne?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- Motors are matched to your barrel size and curtain weight, not just to the space inside the roller box.
How does it work in Newcastle upon Tyne?
Tell us what the roller door at your home in Newcastle upon Tyne is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Newcastle upon Tyne?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Newcastle upon Tyne and nearby
Across Newcastle upon Tyne's NE postcode districts we survey, supply and fit roller garage doors, and repair existing ones, to the same process.
We also cover Gateshead (under a mile), Wallsend (3 miles) and Hebburn (4 miles).
Rules that apply in Newcastle upon Tyne
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Newcastle upon Tyne: questions
Do you charge more for Newcastle upon Tyne than other towns in Tyne and Wear?
No. Guide prices are the same for Newcastle upon Tyne as for anywhere else we cover in Tyne and Wear. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you repair roller doors you did not fit in Newcastle upon Tyne?
Yes. We repair roller garage doors of any make in Newcastle upon Tyne and across NE1, NE2 and NE4, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Do you cover Newcastle upon Tyne?
Yes. Newcastle upon Tyne is part of the area we cover in Tyne and Wear, including NE1, NE2 and NE4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
What should I do while I wait for a visit in Newcastle upon Tyne?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Newcastle upon Tyne visit date is confirmed in writing.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Newcastle upon Tyne
Repairs in Newcastle upon Tyne
Stuck door repair in Newcastle upon Tyne
Battery and safety in Newcastle upon Tyne
Replacement in Newcastle upon Tyne
Smart doors in Newcastle upon Tyne
Colours and woodgrain in Newcastle upon Tyne
Servicing in Newcastle upon Tyne
Manual to electric in Newcastle upon TyneRoller garage door motor replacement in Newcastle upon Tyne
Tell us what you need and we confirm the visit price before anyone comes out.