Repairs and aftercare · CH65

Safety edge and photocell repairs in Ellesmere Port

Before requesting a safety device repair in Ellesmere Port, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in Cheshire, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Ellesmere Port, CH65 and CH66
Area: Cheshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Ellesmere Port?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Ellesmere Port?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Ellesmere Port?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Ellesmere Port and nearby

Ellesmere Port is within the area we cover in Cheshire. Homes in CH65 and CH66 get the same survey, quote and fitting process as everywhere else we work. For reference, Ellesmere Port sits roughly 6 miles from Chester.

We also cover Chester (6 miles), Halewood (6 miles) and Bebington (7 miles).

Rules that apply in Ellesmere Port

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Ellesmere Port: questions

Do you repair roller doors you did not fit in Ellesmere Port?

Yes. We repair roller garage doors of any make in Ellesmere Port and across CH65 and CH66, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you cover Ellesmere Port?

Yes. Ellesmere Port is part of the area we cover in Cheshire, including CH65 and CH66. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What should I do while I wait for a visit in Ellesmere Port?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Ellesmere Port visit date is confirmed in writing.

Can I get a price for Ellesmere Port without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.