Repairs and aftercare · TW13

Safety edge and photocell repairs in Hanworth

If the electric roller door on your garage in Hanworth won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Greater London, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Hanworth, TW13, TW12 and TW2
Area: Greater London

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Hanworth?

Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Hanworth?

Tell us what the roller door at your home in Hanworth is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Hanworth?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hanworth and nearby

If your garage is in Hanworth (TW13, TW12 and TW2), you can get a guide price online now, and we confirm any survey or visit date in writing. Hanworth lies around 12 miles from Westminster.

Looking from a neighbouring town? We also cover Hampton (2 miles) and Feltham (2 miles).

Rules that apply in Hanworth

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Hanworth: questions

Do you charge more for Hanworth than other towns in Greater London?

No. Guide prices are the same for Hanworth as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you cover Hanworth?

Yes. Hanworth is part of the area we cover in Greater London, including TW13, TW12 and TW2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I message you a photo of my garage in Hanworth?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Hanworth. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I get a price for Hanworth without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.