Repairs and aftercare · SK7

Safety edge and photocell repairs in Hazel Grove

A split safety edge or knocked photocell on your roller door in Hazel Grove is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the SK7 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Hazel Grove, SK7, SK2 and SK6
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Hazel Grove?

Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Hazel Grove?

Tell us what the roller door at your home in Hazel Grove is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Hazel Grove?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hazel Grove and nearby

We survey and fit roller garage doors across Hazel Grove, including SK7, SK2 and SK6, as part of our coverage in Greater Manchester. Hazel Grove lies around 8 miles from Manchester.

We also cover Stockport (2 miles), Cheadle Hulme (3 miles) and Hyde (5 miles).

Rules that apply in Hazel Grove

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Hazel Grove: questions

Do you cover Hazel Grove?

Yes. Hazel Grove is part of the area we cover in Greater Manchester, including SK7, SK2 and SK6. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I message you a photo of my garage in Hazel Grove?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Hazel Grove. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you charge more for Hazel Grove than other towns in Greater Manchester?

No. Guide prices are the same for Hazel Grove as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

What should I do while I wait for a visit in Hazel Grove?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Hazel Grove visit date is confirmed in writing.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.