Repairs and aftercare · M6

Safety edge and photocell repairs in Salford

For homes in Salford and elsewhere in Greater Manchester, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Salford, M6, M5 and M50
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Salford?

Never tape over, bridge or bypass a safety device to make an electric roller door close.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Salford?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Salford?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Salford and nearby

We take enquiries from across Salford, from M6 outwards, and confirm every price and date in writing before anything is ordered. For reference, Salford sits roughly 2 miles from Manchester.

Nearby, we also take enquiries from Eccles, Manchester and Swinton.

Rules that apply in Salford

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Salford: questions

Do you repair roller doors you did not fit in Salford?

Yes. We repair roller garage doors of any make in Salford and across M6, M5 and M50, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you charge more for Salford than other towns in Greater Manchester?

No. Guide prices are the same for Salford as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How much is a visit in Salford?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Salford as elsewhere we cover.

What should I do while I wait for a visit in Salford?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Salford visit date is confirmed in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.