Repairs and aftercare · M30

Safety edge and photocell repairs in Eccles

For homes in Eccles and elsewhere in Greater Manchester, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Eccles, M30, M17 and M6
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Eccles?

Never tape over, bridge or bypass a safety device to make an electric roller door close.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.

How does it work in Eccles?

Tell us what the roller door at your home in Eccles is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Eccles?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Eccles and nearby

We take enquiries from across Eccles, from M30 outwards, and confirm every price and date in writing before anything is ordered. Eccles lies around 4 miles from Manchester.

We also cover Swinton (1 mile), Salford (2 miles) and Stretford (2 miles).

Rules that apply in Eccles

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Eccles: questions

What should I do while I wait for a visit in Eccles?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Eccles visit date is confirmed in writing.

Can I message you a photo of my garage in Eccles?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Eccles. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How much is a visit in Eccles?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Eccles as elsewhere we cover.

Do you repair roller doors you did not fit in Eccles?

Yes. We repair roller garage doors of any make in Eccles and across M30, M17 and M6, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.