Repairs and aftercare · M32

Safety edge and photocell repairs in Stretford

For homes in Stretford and elsewhere in Greater Manchester, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Stretford, M32, M17 and M41
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Stretford?

Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.

How does it work in Stretford?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Stretford?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Stretford and nearby

If your garage is in Stretford (M32, M17 and M41), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Stretford sits roughly 4 miles from Manchester.

Looking from a neighbouring town? We also cover Urmston (2 miles) and Sale (2 miles).

Rules that apply in Stretford

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Stretford: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

What should I do while I wait for a visit in Stretford?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Stretford visit date is confirmed in writing.

Do you repair roller doors you did not fit in Stretford?

Yes. We repair roller garage doors of any make in Stretford and across M32, M17 and M41, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How much is a visit in Stretford?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Stretford as elsewhere we cover.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.