Repairs and aftercare · PO16

Safety edge and photocell repairs in Fareham

For homes in Fareham and elsewhere in Hampshire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Fareham, PO16, PO15 and PO14
Area: Hampshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Fareham?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.

How does it work in Fareham?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Fareham?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Fareham and nearby

We survey and fit roller garage doors across Fareham, including PO16, PO15 and PO14, as part of our coverage in Hampshire. Fareham lies around 16 miles from Winchester.

Looking from a neighbouring town? We also cover Gosport (4 miles) and Portsmouth (5 miles).

Rules that apply in Fareham

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Fareham: questions

Do you repair roller doors you did not fit in Fareham?

Yes. We repair roller garage doors of any make in Fareham and across PO16, PO15 and PO14, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I get a price for Fareham without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Fareham?

Yes. Fareham is part of the area we cover in Hampshire, including PO16, PO15 and PO14. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much is a visit in Fareham?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Fareham as elsewhere we cover.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.