Repairs and aftercare · ME16

Safety edge and photocell repairs in Maidstone

Before requesting a safety device repair in Maidstone, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in Kent, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Maidstone, ME16, ME15 and ME14
Area: Kent

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Maidstone?

After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Maidstone?

Tell us what the roller door at your home in Maidstone is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Maidstone?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Maidstone and nearby

Our coverage in Kent includes Maidstone and the ME16, ME15 and ME14 postcode districts, so the same guide prices and written quotes apply here.

Other places close to Maidstone that we cover include Chatham, Rochester and Gillingham.

Rules that apply in Maidstone

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Maidstone: questions

How much is a visit in Maidstone?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Maidstone as elsewhere we cover.

Do you repair roller doors you did not fit in Maidstone?

Yes. We repair roller garage doors of any make in Maidstone and across ME16, ME15 and ME14, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you charge more for Maidstone than other towns in Kent?

No. Guide prices are the same for Maidstone as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I get a price for Maidstone without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.