Repairs and aftercare · ML5

Safety edge and photocell repairs in Coatbridge

For homes in Coatbridge and elsewhere in Lanarkshire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Coatbridge, ML5, ML6 and ML4
Area: Lanarkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Coatbridge?

Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Coatbridge?

Tell us what the roller door at your home in Coatbridge is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Coatbridge?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Coatbridge and nearby

Coatbridge is within the area we cover in Lanarkshire. Homes in ML5, ML6 and ML4 get the same survey, quote and fitting process as everywhere else we work. For reference, Coatbridge sits roughly 7 miles from Hamilton.

Other places close to Coatbridge that we cover include Airdrie, Easterhouse and Motherwell.

Rules that apply in Coatbridge

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Coatbridge: questions

What should I do while I wait for a visit in Coatbridge?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Coatbridge visit date is confirmed in writing.

Do you charge more for Coatbridge than other towns in Lanarkshire?

No. Guide prices are the same for Coatbridge as for anywhere else we cover in Lanarkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you repair roller doors you did not fit in Coatbridge?

Yes. We repair roller garage doors of any make in Coatbridge and across ML5, ML6 and ML4, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.