Repairs and aftercare · ML1

Safety edge and photocell repairs in Motherwell

A split safety edge or knocked photocell on your roller door in Motherwell is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the ML1 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Motherwell, ML1, ML4 and ML3
Area: Lanarkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Motherwell?

Never tape over, bridge or bypass a safety device to make an electric roller door close.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.

How does it work in Motherwell?

Tell us what the roller door at your home in Motherwell is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Motherwell?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Motherwell and nearby

We take enquiries from across Motherwell, from ML1 outwards, and confirm every price and date in writing before anything is ordered. Motherwell is about 2 miles from Hamilton.

Other places close to Motherwell that we cover include Hamilton, Wishaw and Coatbridge.

Rules that apply in Motherwell

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Motherwell: questions

Do you repair roller doors you did not fit in Motherwell?

Yes. We repair roller garage doors of any make in Motherwell and across ML1, ML4 and ML3, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you charge more for Motherwell than other towns in Lanarkshire?

No. Guide prices are the same for Motherwell as for anywhere else we cover in Lanarkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

What should I do while I wait for a visit in Motherwell?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Motherwell visit date is confirmed in writing.

How much is a visit in Motherwell?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Motherwell as elsewhere we cover.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.