Repairs and aftercare · CF31

Safety edge and photocell repairs in Bridgend

For homes in Bridgend and elsewhere in Mid Glamorgan, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Bridgend, CF31 and CF35
Area: Mid Glamorgan

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Bridgend?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Bridgend?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Bridgend?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Bridgend and nearby

Bridgend is within the area we cover in Mid Glamorgan. Homes in CF31 and CF35 get the same survey, quote and fitting process as everywhere else we work.

Other places close to Bridgend that we cover include Maesteg, Tonypandy and Port Talbot.

Rules that apply in Bridgend

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Bridgend: questions

Do you cover Bridgend?

Yes. Bridgend is part of the area we cover in Mid Glamorgan, including CF31 and CF35. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much is a visit in Bridgend?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Bridgend as elsewhere we cover.

Do you repair roller doors you did not fit in Bridgend?

Yes. We repair roller garage doors of any make in Bridgend and across CF31 and CF35, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I message you a photo of my garage in Bridgend?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Bridgend. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.