Repairs and aftercare · DL6

Safety edge and photocell repairs in Northallerton

Before requesting a safety device repair in Northallerton, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in North Yorkshire, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Northallerton, DL6 and DL7
Area: North Yorkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Northallerton?

Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Northallerton?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Northallerton?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Northallerton and nearby

Northallerton is within the area we cover in North Yorkshire. Homes in DL6 and DL7 get the same survey, quote and fitting process as everywhere else we work. Northallerton lies around 30 miles from York.

We also cover Thornaby-on-Tees (14 miles), Ripon (15 miles) and Middlesbrough (18 miles).

Rules that apply in Northallerton

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Northallerton: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Can I get a price for Northallerton without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Northallerton?

Yes. Northallerton is part of the area we cover in North Yorkshire, including DL6 and DL7. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much is a visit in Northallerton?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Northallerton as elsewhere we cover.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.