Repairs and aftercare · WS13

Safety edge and photocell repairs in Lichfield

If the electric roller door on your garage in Lichfield won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Staffordshire, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Lichfield, WS13 and WS14
Area: Staffordshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Lichfield?

A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Lichfield?

Tell us what the roller door at your home in Lichfield is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Lichfield?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Lichfield and nearby

We survey and fit roller garage doors across Lichfield, including WS13 and WS14, as part of our coverage in Staffordshire. For reference, Lichfield sits roughly 15 miles from Stafford.

We also cover Burntwood (4 miles), Tamworth (6 miles) and Aldridge (6 miles).

Rules that apply in Lichfield

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Lichfield: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you repair roller doors you did not fit in Lichfield?

Yes. We repair roller garage doors of any make in Lichfield and across WS13 and WS14, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you charge more for Lichfield than other towns in Staffordshire?

No. Guide prices are the same for Lichfield as for anywhere else we cover in Staffordshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I get a price for Lichfield without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.