Repairs and aftercare · LS27

Safety edge and photocell repairs in Morley

We replace safety edges and photocell pairs on electric roller garage doors of any make in Morley and across LS27 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Morley, LS27, LS11 and WF17
Area: West Yorkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Morley?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Morley?

Tell us what the roller door at your home in Morley is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Morley?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Morley and nearby

We take enquiries from across Morley, from LS27 outwards, and confirm every price and date in writing before anything is ordered. For reference, Morley sits roughly 4 miles from Leeds.

We also cover Batley (3 miles), Dewsbury (4 miles) and Ossett (4 miles).

Rules that apply in Morley

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Morley: questions

Do you repair roller doors you did not fit in Morley?

Yes. We repair roller garage doors of any make in Morley and across LS27, LS11 and WF17, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I message you a photo of my garage in Morley?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Morley. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you cover Morley?

Yes. Morley is part of the area we cover in West Yorkshire, including LS27, LS11 and WF17. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Morley without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.