Up-and-over to roller door conversion in Maidenhead

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

At a survey in SL6 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Maidenhead garage so you can compare.

Not usually, if the box can sit behind the lintel inside the garage, which is the normal position. If there's too little headroom inside, the box can go under the lintel, which does reduce the clear opening height, or be face-fixed on the front of the wall. We measure this at the survey and tell you before you commit.

It depends on how you use the garage and the drive. A roller door doesn't swing out, so you can park closer; it frees the garage ceiling; and insulated laths cut draughts and noise compared with an uninsulated panel. The free survey and written quote give you the actual figure to weigh against those benefits.