Fitting, replacement and upgrades · NE38
Up-and-over to roller door conversion in Washington
Up-and-over to roller conversions in Washington are priced like any new roller door, with removal of the old panel, springs and tracks included. Homes in the NE38 area get a free survey and a fitting date confirmed in writing.
- Guide price
- from £1,195 inc VAT
- First step
- Free survey
- Covers
- Washington, NE38, NE37 and DH3
- Area
- Tyne and Wear
Computer-generated image
What should I know about up-and-over to roller door conversion in Washington?
- An up-and-over frame is kept only if it is sound and square; otherwise it comes out and the opening is prepared.
- If headroom behind the lintel is short, the roller box can go under the lintel or be face-fixed on the wall.
- With no swing-out panel, you can park closer to the garage and still open the door all the way.
- Taking out the up-and-over tracks frees the garage ceiling for shelving, storage or better lighting.
How does it work in Washington?
Get a guide price online for the roller door you'd like in place of your up-and-over. Then book a free survey at your home in Washington.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much does up-and-over to roller door conversion cost in Washington?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Electric single-skin roller door, single up to 2.4 m | £1,195–£1,745 | £995.83–£1,454.17 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Washington and nearby
We survey and fit roller garage doors across Washington, including NE38, NE37 and DH3, as part of our coverage in Tyne and Wear. Washington lies around 6 miles from Newcastle upon Tyne.
We also cover Chester-le-Street (4 miles), Houghton-le-Spring (5 miles) and Hebburn (5 miles).
Rules that apply in Washington
Structural work
Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Up-and-over to roller door conversion in Washington: questions
Is an electric roller door worth it for a garage in Washington?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Washington garage so you can compare.
Can you remove my old garage door in Washington?
Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Washington address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.
Can I get a price for Washington without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you charge more for Washington than other towns in Tyne and Wear?
No. Guide prices are the same for Washington as for anywhere else we cover in Tyne and Wear. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Will I lose height in the opening with a roller door?
Not usually, if the box can sit behind the lintel inside the garage, which is the normal position. If there's too little headroom inside, the box can go under the lintel, which does reduce the clear opening height, or be face-fixed on the front of the wall. We measure this at the survey and tell you before you commit.
Do I need planning permission to change to a roller door?
Changing the door on an existing garage opening usually doesn't need planning permission, but conservation areas, listed buildings, flats, and estates with planning conditions or covenants can be different. If any of those apply, check with your council or management company before you book. Our guide on planning permission and building regulations explains the questions to ask.
Other roller door services in Washington
Up-and-over to roller door conversion in Washington
See a guide price in four steps, then book a free survey.
