Sizes, finishes and features · TW12

Roller garage doors with vision and vent laths in Hampton

For homeowners in Hampton, vision and vent laths are an extra on a new roller door, added when the curtain is made. Start with a guide price online, and we'll confirm the type, number and position at a free survey in TW12.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Hampton, TW12, TW11 and TW16
Area: Greater London

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Hampton?

Weigh up insulation if you're choosing insulated laths, as vent laths let air through and vision laths hold less heat.
Keep anything that must stay completely dry away from vent laths, as some moisture may get in during wet, windy weather.
Decide whether the garage needs daylight, airflow or both, since vision and vent laths do different jobs.
Check the agreed position of the laths in your written quote, and again on fitting day before the installer finishes.

How does it work in Hampton?

A free survey in Hampton then measures the opening and agrees the type, number and position of the laths. Your written quote records all of it.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Hampton?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hampton and nearby

We take enquiries from across Hampton, from TW12 outwards, and confirm every price and date in writing before anything is ordered. Hampton lies around 12 miles from Westminster.

Nearby, we also take enquiries from Hanworth, Sunbury-on-Thames and Twickenham.

Rules that apply in Hampton

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Roller garage doors with vision and vent laths in Hampton: questions

How long does it take to fit a roller garage door in Hampton?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

What do you check at a survey in TW12?

At a survey in TW12 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Hampton than other towns in Greater London?

No. Guide prices are the same for Hampton as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Hampton?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Hampton. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How do I clean vision laths?

Clean them gently, following the manufacturer's care guidance that comes with the door, and avoid abrasive cleaners or scourers that could scratch the see-through sections. Do it with the door closed and, on an electric door, make sure no one operates it while you're cleaning. Keep the guide rails clear of debris at the same time.

Can vision laths be added to my existing roller door?

Vision and vent laths are built into the curtain when a new door is made, which is why we offer them as an extra on new doors. Changing laths in an existing curtain depends on finding compatible laths for that door, so if you want daylight or ventilation in your current garage, it's usually simplest to plan them into a replacement door.