Sizes, finishes and features · SA73

Made-to-measure roller garage doors in Milford Haven

For a made-to-measure roller door in Milford Haven, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Dyfed turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Milford Haven, SA73
Area: Dyfed

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Milford Haven?

Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.

How does it work in Milford Haven?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Milford Haven?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Milford Haven and nearby

We survey and fit roller garage doors across Milford Haven, including SA73, as part of our coverage in Dyfed. For reference, Milford Haven sits roughly 33 miles from Carmarthen.

Rules that apply in Milford Haven

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Milford Haven: questions

Is an electric roller door worth it for a garage in Milford Haven?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Milford Haven garage so you can compare.

Do you cover Milford Haven?

Yes. Milford Haven is part of the area we cover in Dyfed, including SA73. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is the survey in Milford Haven really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do I need permission for a new roller garage door in Milford Haven?

Replacing a garage door is not usually development that needs planning permission in Wales, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.