Fitting, replacement and upgrades · ST3
Manual to electric roller door conversion in Longton
We convert manual roller garage doors to electric for homes in Longton and elsewhere in Staffordshire. You get remote operation, a manual override for power cuts, and a fitting date confirmed in writing once you've accepted the quote.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Longton, ST3, ST4 and ST12
- Area
- Staffordshire
Computer-generated image
What should I know about manual to electric roller door conversion in Longton?
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- A manual override lets you open the converted door in a power cut, and a battery backup unit can be added.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- Wall keypads, key switches and smart app control can be added to a conversion as separate, priced options.
How does it work in Longton?
Once you accept, your fitting date is confirmed in writing and depends on installer availability. On the day the motor, controls and safety devices are fitted, tested and handed over with the paperwork.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Longton?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Longton and nearby
If your garage is in Longton (ST3, ST4 and ST12), you can get a guide price online now, and we confirm any survey or visit date in writing. Longton lies around 12 miles from Stafford.
Looking from a neighbouring town? We also cover Stoke-on-Trent (3 miles) and Newcastle-under-Lyme (4 miles).
Rules that apply in Longton
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Longton: questions
What do you check at a survey in ST3?
At a survey in ST3 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Is an electric roller door worth it for a garage in Longton?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Longton garage so you can compare.
Do you cover Longton?
Yes. Longton is part of the area we cover in Staffordshire, including ST3, ST4 and ST12. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Longton without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
What safety devices are added to a converted door?
A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.
Other roller door services in Longton
Electric doors in Longton
Remotes and keypads in Longton
Battery and safety in Longton
Manual doors in Longton
Made-to-measure doors in Longton
Stuck door repair in Longton
Safety edge and photocells in Longton
Repairs in LongtonManual to electric roller door conversion in Longton
See a guide price in four steps, then book a free survey.