Repairs and aftercare · HR8

Safety edge and photocell repairs in Ledbury

For homes in Ledbury and elsewhere in Herefordshire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Ledbury, HR8
Area: Herefordshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Ledbury?

Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Ledbury?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Ledbury?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Ledbury and nearby

We take enquiries from across Ledbury, from HR8 outwards, and confirm every price and date in writing before anything is ordered. For reference, Ledbury sits roughly 12 miles from Hereford.

Nearby, we also take enquiries from Malvern, Ross-on-Wye and Tewkesbury.

Rules that apply in Ledbury

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Ledbury: questions

Do you repair roller doors you did not fit in Ledbury?

Yes. We repair roller garage doors of any make in Ledbury and across HR8, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you cover Ledbury?

Yes. Ledbury is part of the area we cover in Herefordshire, including HR8. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

How much is a visit in Ledbury?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Ledbury as elsewhere we cover.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.