Repairs and aftercare · RH12

Safety edge and photocell repairs in Horsham

For homes in Horsham and elsewhere in West Sussex, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Horsham, RH12 and RH13
Area: West Sussex

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Horsham?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.

How does it work in Horsham?

Tell us what the roller door at your home in Horsham is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Horsham?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Horsham and nearby

We survey and fit roller garage doors across Horsham, including RH12 and RH13, as part of our coverage in West Sussex. Horsham lies around 25 miles from Chichester.

Looking from a neighbouring town? We also cover Crawley (7 miles) and Horley (11 miles).

Rules that apply in Horsham

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Horsham: questions

Can I get a price for Horsham without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you repair roller doors you did not fit in Horsham?

Yes. We repair roller garage doors of any make in Horsham and across RH12 and RH13, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How much is a visit in Horsham?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Horsham as elsewhere we cover.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.